TEL:0086-513-68103666 MAIL:wdh@jsdjjg.com Hello,welcome to visit Jiangsu Dajin Laser Science and Technology Co.,ltd
  • 1
  • 2
News
Contact

Jiangsu Dajin Laser Science And Technology Co.,Ltd

Tel:0513-68103666 

Fax:0513-80685066 

Contacts:Mr Wu 

Mobile Phone:+8615962780123

Whatsapp:+8618651070797

Email:Wdh@jsdjjg.com 

Add:No.188,West Zhennan Road,Libao Town Haian County,Nantong City,Jiangsu Province

After-sales service in India:

True Motion Technology

Address:shop No.24,Sanskrut Residency,Opp.Seven-day School,Nikolgam,Ahemdabad.382350

Mobile:+919913257575

Contact person:Kalpesh Panchal


Company news

Influence factors of laser cutting in laser equipment

In laser machining, laser light emitted from the laser collimation and focusing lens by the sink of the cutting head to a point (focus), operators need to ensure that the laser beam machining in the nozzle is the center, and adjust the distance from nozzle plate surface (as the plate thickness and spray nozzle), high pressure gas, and with the completion of the laser beam cutting operation. Di laser cutting machine factory shows that the main factors affecting the following aspects:

(1) focus diameter

Small diameter, narrow incision, small cutting thickness, big diameter, wide kerf and large cutting thickness.

(2) focus position;

The size of the spot and the notch shape of the workpiece are determined. The optimum location depends on the type and thickness of the material.

(3) power

Affect the thickness of the cutting plate, affect the processing efficiency and deformation.

(4) cutting speed;

It needs to match the power and gas flow rate, too small to cause cutting or burr formation.

(5) nozzle diameter;

Small diameter, suitable for cutting thin plates; large diameter, suitable for heavy plate cutting.

(6) gas

The purity of the gas affects the burr formation and the oxidation of the cutting surface. The thinner the gas flow, the thinner the plate, the greater the pressure.

(7) beam mode

The capacity of Di laser is below 1500W, single-mode, and power 1500W is multimode. The single mode has good effect in thin plate cutting, the multimode facula is larger and the energy distribution is uniform. It is suitable for thick plate cutting.


    Add:No.188,West Zhennan Road,Libao Town Haian County,Nantong City,Jiangsu Province

    Cell:0086-15962780123

    Whatsapp:+8618651070797,wechat:+8615962780123

    Tel:0086-0513-68103666

    Website:www.jsdjjgkj.com

    Email:Wdh@jsdjjg.com